Showing posts with label News. Show all posts
Showing posts with label News. Show all posts

Some of my experimental problems

Friday, July 29, 2011

As some of you know, I am currently a Ph.D student in my final year and at this moment I can say I am working very hard running my experiments. Why do I say so? Well, part of the reason is because I'm the earliest person to reach the lab and the last person to leave the lab for any single day (accept if I have something urgent going on). I run 1 to 3 experiments per day depending on the situation that day. Why I say this, you'll know when I list down some of the problems I face when I run my experiments.

The experiments that I or other Ph.D students run are no ordinary experiments. The experiments are not at all similar to those that the undergraduates carry out in the lab. We are running our own individual experiments for research and discovery purpose. We are seeking for new information, new knowledge, new theory, new discovery. We want to find out about something. We want to see whether this and this works or not. We want to see what will happen when we do this and this and so on. Of course, this will be based on our literature review and hypothesis. Our experimental set-up is in most case unique and not similar to others. If it is similar though, there will be perhaps 2, 3 or 4 almost similar experimental set-up. I'm referring to the experimental set-up that we create ourselves.

OK, the main thing I want to share here is the list of problems, challenges, hurdles that interrupt the process of me running my experiment. Some of the problems are as stated below.

  • process tubing leaks
  • fitting leaks
  • o-ring burst
  • gas suddenly finish
  • furnace suddenly cannot operate
  • heating tape spoil
  • heating tape controller spoil
  • reactor easily broken (quartz)
  • support for catalyst broken
  • Not enough or no liquid to collect for analysis
  • Gas that is collected in a container could not be analyzed
  • Dirty GC column
  • Column not suitable for our products
  • GC need to be calibrated
  • No gaseous available, need to order gaseous from company
  • Rota flow meter not reliable, cannot control flow of carrier gas
  • No mass flow controller
  • Vacuum fitting cannot be tightened
  • Data logger for temperature monitoring software has problem
  • thermocouple seal leak and fluid penetrate through wire and flooded the data logger
  • Quartz tube after experiment are very dirty and difficult to clean
  • No water bath, so I have to used my own condenser.
  • Sabotage (this happen to my colleague. Her gas tank tubings were cut).
Please be informed that I'm not listing all these problems to discourage or demotivate some of you who may consider to pursue your Ph.D with experimental work. What I'm trying to highlight here is that if you are running experiments for your research work, you will face with tonnes of challenges. You need to stay strong and motivated. You need to focus at the end result. Of course there will be some obstacles, problems, delays and many other things that will result to you feeling down. I will be lying if I say I'm always motivated. I faced numerous expected and unexpected challenges. It's really up to me to react on the problem and overcome those challenges.

In addition, during this critical time, we need to always be positive and pray to God for assistance. On top of that, when ever we have experimental problems or delays, we need to have plan A, B, C and so on which means we can do other things such as drafting technical papers, search for latest literature review, learn related softwares etc.

If any of you have some good experience to share, feel free to contact me. I would love to hear from you as well. Cheers...

OK, that's enough for now. I'll share later updates with you soon. For my fellow Muslim chemical engineers (student or practicing), I wish you Happy Ramadhan and hope all of us can be fasting with peace.

...................................................................................................................
FREE Recommended magazines to get you updated with current engineering news




Have you downloaded my free "Choosing Alternative Fuel" Ebook? If not, then please download it here. It's Free and on top of getting the free ebook, you'll get eCourse on Alternative Fuel. It's a good and easy way to add more valuable information to yourself.

International Conference of Chemical Engineering and Industrial Biotechnology in Conjunction with 25th SOMChe 2011 (ICCEIB-SOMChe 2011)

Friday, April 15, 2011

I have asked many people and searched vigorously in the internet about this year's Symposium of Chemical Engineers Malaysia (SOCHE 2011). Unfortunately no information is available until a colleague forwarded an email in our staff mailing list just now. Finally, the information was revealed, question was answered. SOMCHE 2011 will be organized by University Malaysia Pahang (UMP). This time they will be organizing and combining SOMCHE alongside with the International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB). Hence, the two will combine and become ICCEIB-SOMChe 2011.
Important information regarding ICCEIB-SOMChe 2011:

Abstract

Abstract format can be obtained from the official webpage: http://www.icceib.ump.edu.my/.

Important Deadline
Abstract submission due : 30 Apr 2011
Acceptance notification : 30 Jun 2011
Full Paper submission due : 31 Jul 2011
Registration deadline : 15 Oct 2011


Language
All Papers, Oral and Poster Presentation must be in English.

Venue

The Zenith Hotel & Sultan Ahmad Shah International Convention
Centre, Kuantan, Pahang, Malaysia

For more information, please download brochure Page 1 and Page 2.


Objectives & Topics

The objectives of this conference are:

1. To provide professional development relevant to the needs of chemical engineers, academics as well as researchers in the field of chemical engineering. This will be achieved by providing opportunities for the sharing of opinions, ideas, industry best practices as well as the latest research and development.

2. To provide an opportunity for face-to-face contact between chemical engineers from around Malaysia and the rest of the world and hence to facilitate networking both nationally and internationally.

Call for Papers

The ICCEIB-SOMChE 2011 Organizing Committee welcomes the
submission of original contributions for oral and poster presentations
on the following topics:

1. Food/Pharmaceutical engineering and manufacturing
2. Biotechnology/Bioprocess
3. Fluid flow and Thermodynamic
4. Bioenergy/ Green technology and Renewable energy
5. Waste to wealth
6. Advanced material / composites / nanotechnology
7. Enzyme technology/Industrial biochemistry
8. Petrochemical Processing
9. Natural products / Commodity Crops
10. Process Control, Instrumentation and Optimization
11. Combustion / Reaction engineering
12. Environmental Engineering
13. Membrane Separation
14. Safety and Health Management
15. Related chemical and biochemical engineering issues

Fees & Payment

The conference fee is structured as follow:
1. International : USD 400.00
2. Local : RM 1000.00
3. Student : RM 750.00

ICCEIB-SOMChe 2011, Kuantan, Pahang Darul Makmur, Malaysia 28 Nov 2011 - 1 Dec 2011

The International Conference of Chemical Engineering and Industrial Biotechnology in Conjunction with 25th Symposium of Malaysian Chemical Engineers 2011 (ICCEIB-SOMChe 2011)


CALLING FOR PAPERS


The Symposium of Malaysian Chemical Engineers (SOMChe) is the name given to the annual symposium, now under the auspices of IChemE in Malaysia. SOMChe has been held annually since the late 1980s and the event has been rotated annually amongst Chemical Engineering Department in Malaysian Universities. This year, Universiti Malaysia Pahang (UMP) is given the honor to host the SOMChe.

In conjunction of SOMChe, Faculty of Chemical Engineering and Natural Resources, Universiti Malaysia Pahang jointly organizes the International Conference of Chemical Engineering and Industrial Biotechnology (ICCEIB 2011). This conference is expected to provide good and meaningful platform for presentations from all over the world, academia and industry to exchange their valuable ideas amongst the professional chemical engineering community. (refer to the attached brochure for the details of the conference)

Interested participants should submit the papers/posters titles now or as soon as possible. The contributions of attendees such you might enrich the program through enhancing the diversity of perspectives and content represented. In addition to this, it is highly appreciated if you could forward this matter to the interested professors, researchers, especially students, and junior faculty members, who need visibilities to present/share their research outcomes either in the form of oral or posters presentation.

If you have any questions or concerns, or if I may be of assistance in any way, please do not hesitate to contact us.

Tel: +609-549 2864
Fax: +609-549 2889
Email: icceib@ump.edu.my, info@ump.edu.my

Publicity & Protocol
ICCEIB-SOMChe 2011,
Faculty of Chemical Engineering and Natural Resources,
Universiti Malaysia Pahang

.................................................................................................................................
FREE Recommended magazines to get you updated with current engineering news




Have you downloaded my free "Choosing Alternative Fuel" Ebook? If not, then please download it here. It's Free and on top of getting the free ebook, you'll get eCourse on Alternative Fuel. It's a good and easy way to add more valuable information to yourself.

Masters and Ph.D Students Wanted

Wednesday, March 23, 2011

Do you have intention to further study in Chemical Engineering? If you have a chemical engineering degree and would like to pursue your masters or Ph.D degree, now is your chance. My wife, Dr. Mazura Jusoh from Faculty of Chemical Engineering, Universiti Teknologi Malaysia, is searching for a few post graduate students and this is an opportunity for those who are interested.


The field is obviously Chemical Engineering which will focus on Separation Technology. To be more specific, you will explore the fundamental and science of Progressive Freeze Concentration, a field which is still not explored in Malaysia.

Financial assistance will be provided for the first few students only. So, to grab hold of this offer, you need to act fast.

Masters duration - Full time research - 2 years.
Ph.D duration - 3 years.

Interested candidate can write and send your CV to the following email address:

mazura[alias]cheme.utm.my.

Here is an example of a related study of this field...

Abstract : DEVELOPMENT OF A NOVEL DESIGN FOR PROGRESSIVE FREEZE CONCENTRATION PROCESS

Industrial wastewater may well be treated by freeze concentration, a process which freezes or crystallises out water content as pure ice crystals and leaves behind a highly concentrated solution in a smaller volume. In conventional suspension freeze concentration (SFC) whereice crystals formed as a suspension in the mother liquor, separation of the solid-liquid mixture is difficult and costly. The size of ice crystals is still very limited and the seeding process requires usage of scraped surface heat exchangers (SSFE), which is significantly expensive and accounted for approximately 30% of the capital cost. Progressive freeze concentration (PFC) invented later is believed to provide cost saving and simplify the subsequent ice-liquid separation as ice crystals are formed as a layer or a block on the cooling surface. Quest for a design providing convenience and good efficiencies continues, and in this study a helical structured copper crystalliser was developed and fabricated named Multi-wind Crystalliser (MWC). Effects of several operating conditions on the performance of MWC in context of wastewater treatment were then investigated including circulation flowrate, initial solution concentration, coolant temperature and circulation time. The performance of the design was evaluated by three dependent variables including the effective partition constant, K, calculated from the volume and concentration of the solid and liquid phase. Two other parameters were ice purity and solution volume reduction. A process optimisation was also performed thereafter employing STATISTICA to produce optimum conditions in favour of the stated independent variables. As the crystalliser designed involves heat transfer, the overall heat transfer coefficient was also calculated through temperature profiling subsequently generating a prediction model for ice crystal mass. At the end of the research, a new crystalliser design for PFC is established and an observation of how the operating conditions affect the performance of the system was obtained. Optimum operating conditions was determined by process optimisation and an overallheat transfer coefficients were also generated. Adequacy and reliability of the ice crystal mass prediction model produced was proven by error analyses revealing relatively small errors.


-------------------------------------------------------------------
FREE Recommended magazines to get you updated with current engineering news


Have you downloaded my free "Choosing Alternative Fuel" Ebook? If not, then please download it here. It's Free and on top of getting the free ebook, you'll get eCourse on Alternative Fuel. It's a good and easy way to add more valuable information to yourself.

 
Chemical Elements - Made free by Free Blog,SEO Created by Diznews Online
by TNB